ancho : 380mm (ancho máximo cuando está instalado) a 575mm (stock)
altura : 210mm (núcleo de hilo de soporte a núcleo de agarre del manillar) <170mm
offset : 270mm (desde la base del soporte de sujeción hasta el extremo de la barra) <-> stock 88mm
La longitud de la parte del agarre de la barra : 195mm ⇔ stock 170mm
Especificación de la tubería de acero inoxidable
Énfasis en apretar" desde el centro al centro de la manija de tono izquierda y derecha : 100mm
Se pueden utilizar los soportes de mango estándar.
hecho en Taiwán
*Engrásalo ligeramente si la ranura de la barra interfiere con el soporte.
*El soporte de la foto no está incluido.
Width: 380mm (Maximum width when installed) ⇔ Stock 575mm
Height: 210mm (From the center of the thread of the holder to the center of the handlebar grip) ⇔170mm (stock)
Offset:270mm (from base of mounting holder to bar end) ⇔ stock 88mm
Length of the bar grip: 195mm ⇔ Stock 170mm
Stainless steel pipe specification
Compared to the stock handle, "Squeezing is emphasized" from the center to the center of the pitch of the left and right handle: 100mm
Stock handlebar holder can be used.
made in Taiwan
*When the bar slot interferes with the holder due to individual differences in installation, apply grease lightly.
*The holder in the image is not included.