Stomp Grip es un equipo de apoyo para la conducción que ha evolucionado hasta convertirse en una pieza funcional que reduce la fatiga, mientras que la mayoría de los productos están diseñados para ser un sello anti-rayas para el cuerpo..
Se apoya mucho en varias situaciones desde la calle hasta la pista..
Se utiliza material elastomérico patentado y un fuerte adhesivo 3M.
Incluso cuando se conduce con fuerza, las almohadillas mantienen su agarre original..
MADE IN THE USA!
Los Stomp Grips son usados por los mejores corredores y los mejores especialistas de todo el mundo..
Popular en las calles y en los circuitos de Japón.
El número de usuarios de StompGrip está creciendo rápidamente en todo el mundo!.
[cómo aplicar el agarre de pisotón]
1. Limpie la superficie de aplicación..
(Si está usando Clear, por favor, limpie las manchas de suciedad y agua con compuesto antes de usarlo).
2. Por favor, desengrase la superficie de aplicación..
3. Posicionando..
4. Por favor, empiece por el borde para evitar que entre el aire.. Por favor, retire el papel de respaldo mientras lo aplica..
(Si está usando clear, por favor aplíquelo lenta y seguramente, poco a poco, empezando por el borde.. Se puede aplicar limpiamente sin que entre aire.. )
El adhesivo para StompGrip necesita 24 horas para estabilizar su fuerza adhesiva..
La adhesión completa requiere 72 horas..
Si lo usas antes de que esté completamente adherido, puede que se salga o se resbale..
While most of the products are just a sticker to prevent scratches on the body, the Stomp Grip is a riding support gear that has evolved into a functional part to reduce fatigue.
From the street to the circuit, it is highly supported in various situations.
Originally developed elastomer material, strong 3M adhesive is used for the adhesive.
The pad keeps its original gripping power without shifting even in hard riding scenes.
MADE IN THE USA!
Stomp Grip is used by top racers and stunt riders all over the world.
It is very popular in the circuit and the street in Japan.
Stomp Grip users are increasing all over the world.
[stomping on stomp grips]
1. Clean the surface to be applied.
(When using clear, please remove dirt and water stains with compound before starting work)
2. Degrease the surface to be applied.
3. Perform positioning.
4. Apply from the edge so that air does not enter.Peel off the backing paper while pasting.
(If you use a clear sheet, apply it slowly and carefully, taking your time from the edge.It is possible to stick it beautifully without air entering.)
The adhesive of Stomp Grip needs 24 hours to stabilize the adhesive strength.
Full adhesion requires 72 hours.
If you use the product before it is fully bonded, it may peel off or shift.