Excellent
special productIf the screw of the Tandem Footpeg can be removed easily, it would be 3 stars. The tool can be done with the in-vehicle tool.
However, in most cases Screwfix. It should be very hard in the *, so it might be a 2 or 1 if you include that point. (This is not a Holder problem, so it is not included in the score.
The story of Screw removal
I tried to turn it with a better Hexagonal Wrench just in case, but it didn't budge.
I borrowed my family's Dryer and heated it up for about 2 minutes. This should soften the Screw stopper liquid.
Oh, it worked, heating is good after all. However, it was very hard, and it took about 30 minutes to pull out 4
In this case, I can use Socket wrench if it is normal Nut, but I don't have this size hexagonal adapter, so I just turn it by hand.
If it's just the slippery footpeg and Holder, but if you put the Spacer in, the Screw head will just stick out about 5mm. (There's about 1cm if you're into that) It was hard to do. I managed to do the Right Side by myself, but I gave up on the Left Side. I asked my son to hold it and completed it.
You can use SEROWTape or something to stop the Spacer and drill the screw holes.
If you want to do it by yourself, you can hang the Holder with a string, prepare a long Bolt, and fix one place temporarily.
So, what do you think? When I took off the Bag, I chose the one that is not noticeable, and this is the right one. (image)
It is a special product, and Bag is supported firmly, and it doesn't hit Blinker anymore! (image)
I'm happy with the texture even when it's removed and bare.
Bag is TANAX motofizz:TANAX Moto fizz Multi Fit Side Bag M MFK-186
Tools used.
The Hexagonal Wrench is a hard but short one that you turn first, and a longer one that is a little softer but has more power due to the Lever principle. The long one has a ball hexagon on the other side, so it was convenient to turn round and round when it became loose.
I don't need to tell Veteran, but Hexagonal Wrench is turned with this of an automotive tool like this (image)
The Screw is a slippery liquid like iron powder, and the Hexagonal Wrench bites Firmly!
It is hard to show, but the Pink colored screw retainer was attached quite well, and it fell down as a powder when I pulled it out.
From the seniors. Don't use it often. I've been told that 556, I almost wiped the stones! (Lol)
Omake Holder Candidate
The trusty Pepco's are Large exaggerated, BMW's are fine. (Lol)
GIVI's seems to fit the DAYTONACarrier that I'm using, but Tough
SW-MOTECH's is the type to fasten the back to the hole of the stick. it seems impossible to fasten it except SWBag.
So, the most Recommendation is OEM 70,000 yen per bag, but if it is a Universal ProductBag, then SHAD is Recommendation.View Detail