Un parabrisas con un mecanismo de ajuste de ángulo que proporciona tanto protección aérea como estilo a un alto nivel.
La combinación de la pantalla y el soporte interior de FRP le da a la pantalla rigidez y una apariencia frontal única..
Operando el puente superior, el ángulo de la pantalla se puede ajustar infinitamente para adaptarse a las condiciones de conducción..
Las monturas de goma y la unidad de ajuste del ángulo están diseñadas para la conducción a alta velocidad..
El cuerpo principal de la pantalla está hecho de policarbonato de 3 mm de espesor (especificación de la capa dura).
Disponible en colores claros y ahumados y en tres tamaños.
Pernos de 8mm en ambos lados, diámetro de la luz para el normal φ180mm.
Escudo Gaillard
Parabrisas de ángulo variable con superficie cúbica para una mayor protección del aire.
Gaila significa "kimono en armadura", y es un carenado frontal con un diseño que combina robustez y elegancia..
Se establece un soporte interno de FRP en la pantalla para aumentar la rigidez de la misma y al mismo tiempo, crear un área frontal única..
Además, el mecanismo de ajuste de ángulo exclusivo de Sick Design permite que el ángulo de la pantalla se ajuste infinitamente de acuerdo con las condiciones de conducción, desde la conducción general hasta la conducción a alta velocidad..
El cuerpo principal de la pantalla está hecho de policarbonato de 3 mm de espesor (especificación de la capa dura).
Disponible en tres tamaños, claro y humo.
Este es el nivel más alto de protección contra el viento entre los carenados montados en el manubrio porque es posible ajustar el carenado para que se adapte al tipo de vehículo y al físico del conductor..
Diseño atornillado para modelos de coches compatibles
El tipo de tornillo está disponible..
La parte delantera de la pantalla está diseñada para cubrir la luz y crear una cara delantera nítida sin reducir la cantidad de luz..
No se necesitan herramientas especiales para instalarlo..
Fácil de acoplar y desacoplar con las herramientas del vehículo y compatible con la inspección de vehículos..
Pantalla de ángulo ajustable con un solo toque
La derecha y la izquierda se montan en ambos lados de la luz, y el ángulo de la pantalla se puede ajustar alrededor de estos dos puntos..
Los pernos de montaje laterales y los pernos de fijación del tirante interior están hechos de acero inoxidable duradero..
El ángulo puede ser ajustado rápida y fácilmente sin usar ninguna herramienta por la perilla de ajuste en el centro del manubrio (herramienta requerida para el MT-01).
El rango de movimiento depende del modelo de coche..
El ángulo del NC700S se puede ajustar en dos pasos, mientras que el ángulo del VMAX1700 se puede ajustar con los mandos izquierdo y derecho..
La pantalla viene en tres tamaños: S, M y L
Ideal para grandes motos, la talla L proporciona una protección premium contra el viento para los cruceros de alta velocidad..
La talla M está diseñada para funcionar bien con una amplia variedad de bicicletas, sin mencionar las bicicletas de clase media para desnudarse..
La talla S es ideal para el tamaño de un cuarto sin sacrificar la protección contra el viento..
La forma de la pantalla es la misma en las tallas S, M y L, y la longitud y el ancho se ajustan cortando el extremo posterior..
La posición de montaje de la pantalla es la misma y puede ser cambiada a otro tamaño dependiendo de la aplicación..
Los tamaños de pantalla S, M y L tienen el mismo precio..
Para la instalación de la pantalla se utilizan tornillos de acero inoxidable duraderos, arandelas de policarbonato y tuercas de seguridad..
En el caso de un soporte superior de manillar integrado (soporte superior de tipo split)
El bloque de la abrazadera del escudo del giroscopio está instalado en el centro del mango de la barra..
Si el soporte superior del manillar (la parte que sostiene el manillar en su lugar) está integrado en el manillar izquierdo y derecho, sustitúyalo por un soporte superior de manillar dividido (pieza original del fabricante/2 piezas) y luego instale el Gaillashield..
(Número de partes genuinas de Honda:53131-MS8-000 / Número de partes genuinas de Kawasaki:46012-1191)
Si tiene un Escudo de Geira que no se sabe que se aplique a su vehículo
La adaptación del escudo del giroscopio a cada modelo de coche se hace cambiando el soporte interior y los accesorios..
No existe una diferencia significativa en cuanto a la apariencia de los productos para todos los tipos de vehículos, sin embargo, la instalación del producto en vehículos que no sean los mencionados anteriormente puede causar problemas inesperados, lo cual es muy peligroso..
Windshield with angle adjustment mechanism that combines air protection and styling at a high level.
The combination of the windshield and the FRP inner bracket increases the rigidity of the windshield and at the same time creates a unique frontal area.
Stepless adjustment of the windshield angle to suit the riding conditions by means of the controls on the top bridge.
It is designed for high speed riding by 3 points of mountings of rubber mounts on both sides and angle adjustment unit.
The windshield itself is made of 3mm thick polycarbonate (hard coat specification).
The color is set up clear and smoke, and the size is also selectable from three kinds.
Bolt 8mm on both sides of light, light diameter is for stock Φ180.
■Guyra Shield
Variable angle type windshield with tertiary curved surface for superior air protection.
Guyra means a suit of armor, and this front fairing is designed with a fusion of ruggedness and elegance.
The inner bracket made of FRP is set inside the windshield to increase the rigidity of the windshield and at the same time to produce a unique frontal area.
In addition, the angle of the windshield is full adjustable according to the riding conditions from general riding to high-speed riding by the angle adjustment mechanism originally developed by Chic Design.
The windshield itself is made of 3mm thick polycarbonate (hard coat specification).
Available in three sizes and in clear and smoke colors.
The fairing can be set up according to the type of vehicle and the rider's physique, and boasts the highest level of windproof performance among handlebar mounted fairings.
■Bolt-on design for compatible models
There are different types for each model, and installation is bolt-on.
The front side of the windshield is designed to cover the light a little to produce a sharp front face without reducing the amount of light.
No special tools are required for installation.
It can be easily detached with only an in-vehicle tool.
One-touch angle adjustment windshield
The angle of the windshield is adjustable around the rubber mounts on both sides of the light.
The side mount bolts and the bolts to fix the inner bracket are made of stainless steel for durability.
The adjustment knob mounted in the center of the handlebar allows quick and easy angle adjustment without the use of tools (tools are required for MT-01).
The range of motion varies depending on the model.
For NC700S, the angle can be adjusted in 2-way (up and down), and for VMAX1700, the angle can be adjusted by the left and right knobs.
■Windshield sizes are available in S, M, and L
The L size is ideal for big bikes and provides the best wind protection for high-speed cruising.
M size is designed to be compatible with a wide range of bikes as well as middle class naked bikes.
The S size is the most compact size without sacrificing windproof effect and is suitable for quarter class size.
The shape of the windshield is the same for all sizes (S, M, L), and the length and width are adjusted by cutting the back end
The mounting position of the windshield is the same, so it can be changed to a different size windshield depending on the application.
The price is the same for windshield sizes S, M, and L.
Durable stainless steel screws, polycarbonate washers and lock nuts are used for windshield mounting.
■In case that the handlebar upper holder is an integrated type (Regarding split type upper holder),
The Guyra Shield clamp block is mounted in the center of the bar handle.
If the handlebar upper holder (the part that holds the handlebar) is integrated left and right, replace it with a split type handlebar upper holder (manufacturer's stock part / 2 pieces) and then install Guyra Shield.
(HONDA OEM Part No: 53131-ms8-000 / KAWASAKI OEM Part No: 46012-1191)
If you have a Guyra Shield for which you are not sure of the application on the type of vehicle
Application of Guyra Shield to each model is done by changing inner bracket and metal fittings.
There is no significant difference in appearance between the two types of vehicles, but it is very dangerous to install the product on other types of vehicles as it may cause unexpected problems.