material : FRP/gelcoat blanco
capacidad : Aprox. 122,5 litros
peso : Aprox. 8 kg
Espesor del FRP : Aprox. 2,5 mm
[Accesorios]
1 x luz trasera LED de montaje alto (instalada)
Lámina térmica interior
Soporte de montaje x4 pcs.
4 arandelas de primavera
Lavadora x8
X 4 nueces
4 pernos
Llave de bloqueo x 2 piezas.
*No se incluyen las instrucciones de instalación y manejo.
*Existe la posibilidad de que el producto sea importado y pueda ser dañado en el proceso de fabricación o durante el transporte.
*La garantía no cubre la instalación de la bicicleta en ningún caso si la bicicleta es instalada por alguien que no sea la tienda de bicicletas (mecánico con licencia). Además, la garantía no está cubierta por la garantía.
*La instalación debe ser llevada a cabo por una persona con conocimientos.
Ponga la caja FRP en la cama de carga y fíjela en una posición fija.
Taladrar agujeros en la cama de carga y en la caja y fijarlos con los pernos adjuntos.
Confirme que los pernos están apretados, luego compruebe la operación y el trabajo se ha completado.
*Asegúrese de comprobar si los pernos están apretados después de terminar el trabajo para la prevención de accidentes.
*Si se instala en el Benly Pro o Benly 110 Pro, es necesario sustituir el bastidor trasero por un bastidor trasero estándar.
*Cuando se instala la caja de mensajería en el Zoomer, se requiere el transporte trasero especial.
*Si se instala en Newsgear, es necesario reemplazar el estante trasero por un estante trasero estándar.
Material: FRP Made / White Gel Coat
Capacity: Approx. 122.5 liters
Weight: Approx. 8kg
FRP Thickness: Approx. 2.5mm
[Components]
・High Mount LED Tail Lamp x 1 (Installed)
・Interior heat insulation sheet
・Mounting bracket x 4pcs
・4 spring washers
・Washer x 8pcs
・Nut x 4pcs
・Bolt x 4pcs
・2 locking keys
*Installation and handling instructions are not included.
*There is a case that there is a scratch etc. in the manufacturing process and on the way of transportation because it is an imported product.
*The warranty does not cover defects caused by work carried out by persons other than a motorcycle shop (licensed mechanic).We are not able to answer your inquiry about the installation because it depends on the vehicle.
*Please have the person who has the knowledge of maintenance do the installation method and the work.
*Place the FRP box on the cargo bed and determine the fixing position.
*Drill holes in the cargo bed and box and use the supplied bolts to secure.
*After confirming that the bolts are tightened, the operation is confirmed and the work is completed.
*Please make sure to check the bolts are tightened after the work is completed to prevent accidents.
*When installing the rear carrier on BENLY PRO / BENLY 110 PRO, it is necessary to replace the rear carrier with a standard model rear carrier.
*A special rear carrier for the delivery box is required when installing on ZOOMER.
*When installing on Newsgear, the rear carrier must be replaced with a standard model rear carrier.
*There may be changes in product specifications due to the manufacturer's reasons.