La inclinación frontal de la superficie del asiento se hace horizontal y la superficie del asiento se eleva 20 mm (15 mm en el caso de los modelos más nuevos) en comparación con el asiento de fábrica..
Cuanto más alta sea la posición del asiento, más cómoda será la flexión de la rodilla para pisar..
Se aumenta la carga del escalón y se reduce la carga en las nalgas (asiento)..
La esponja más gruesa hace que el viaje sea mucho más cómodo, especialmente para las giras de larga distancia..
La zona de asientos es más amplia que el asiento de fábrica para asegurar un viaje cómodo, pero la zona de bajada de las piernas es del mismo ancho que el asiento de fábrica para proporcionar una posición libre de tensión..
Se ha cambiado de la base del asiento a los productos exclusivos, y el polvo con la tapa del tanque y la capota lateral se distribuye uniformemente y parece que el coche se ha levantado..
[Características]
Los cinturones tándem son estándar.. (Sólo hay que mover el gancho del asiento de la reserva.. )
Los asientos se instalan con una llave como los de fábrica, y no se requiere ninguna modificación en el cuerpo..
La esponja de inyección que se dispara en el molde se utiliza para proporcionar una buena amortiguación y poco cambio con el tiempo, por lo que se puede utilizar durante mucho tiempo..
Hecho de cuero negro liso.
Todas las costuras están cosidas.
Tuberías con ribetes blancos en las líneas de costura laterales.
Tipo A con costuras en los lados del pasajero.
La dureza estándar de la esponja es de 60 a 80 kg..
The front inclination of the seat has been made horizontal, and the seat is 20mm higher than the stock seat (15mm higher than the stock seat in the 17th year and later).
By raising the seating position, the knee bend becomes more gentle and the step operation becomes easier.
The step load is increased, and the load on the buttocks (seat) is relatively decreased, and the burden is reduced.
The thickness of the sponge has been increased to improve the ride comfort, so it is especially recommended for long distance touring.
The seating area is wider than the stock seat to ensure comfort, but the area for the feet is the same width as the stock seat.
The base of the seat is specially designed, and the tank cover and the side cowl are evenly matched.
[Features]
Pillion belt standard.(Only the relocation of the hooks from the stock seat is required.)
The seat can be installed with the same key as the stock seat, and no modification to the vehicle body is required.
It is made of injection sponge, which is fired in the mold, so it has good cushioning and does not change with age, so you can use it for a long time.
Made of plain black leather.
All seams are stitched.
White piping is applied to the side seam line.
A type with stitching switch on passenger side.
The hardness of the sponge is set to the standard for the weight of 60-80kg.