La suavidad del software lo hace muy efectivo en superficies curvas!
Discos de 100 mm de metal para amoladoras de disco.
Se utiliza principalmente para la eliminación de cordones de soldadura, desbarbado, eliminación de óxido y pulido de superficies planas..
[Característica 1: Suave y flexible]
La característica de esta máquina es que la base de la tela es muy pequeña y está doblada, por lo que es posible ajustar la presión al objeto y es especialmente eficaz para superficies curvas..
Consejo: La imagen muestra una rebaba en la pieza de trabajo..
Esto da como resultado la dispersión de la presión, lo que facilita la adaptación al objeto y muestra su fuerza en las superficies curvas..
Para los objetos de forma libre, este "software" es la única opción..
[Característica 2 - Suavizar la superficie]
Esto se debe a que las partes sobresalientes del software se afeitan fácilmente debido a su característica "flexión"..
Es adecuado para suavizar y alisar.
*La belleza de lo "suave" es que la forma de aplicar la presión puede cambiar la forma de hacerlo..
[Característica 3 - Compatibilidad con molinos de baja velocidad]
También puedes usar un molinillo normal, pero también es muy compatible con un molinillo de baja velocidad..
[Artículo 4 - Sobre la rueda de circonio]
La piedra de moler de la tela es la zirconia..
Duro y adecuado para el corte de servicio pesado y fuerte contra el corte de acero inoxidable..
[Velocidad del molino de disco]
Cuando se usa a baja velocidad (bajas RPM), la fuerza centrífuga se hace pequeña, por lo que el contacto entre el disco de molienda y la pieza de trabajo se hace suave..
Esto facilita que la forma de la tela abrasiva encaje con la pieza de trabajo, especialmente en el caso de "suave" y "aire" donde la influencia de la fijación del sustrato es pequeña, y facilita la realización del rectificado y el corte de acuerdo con la forma de la superficie curvada..
También reduce el desgaste, los daños, las mordeduras y los enganches causados por las telas abrasivas volantes..
*Es fácil de operar de manera uniforme durante el acabado, lo que conduce a menos arañazos..
Por otro lado, el corte de alta resistencia resulta en una velocidad de corte más lenta debido a la disminución de la cantidad de trabajo debido a la disminución del número de revoluciones..
Para "Flat" y especialmente "Cut", recomendamos el uso de un tipo de rotación general de alta velocidad..
[Molino de baja velocidad]
*Un molino de disco de baja velocidad y alto par o un controlador de velocidad con función de cambio de marchas es la elección más común..
[Compatibilidad con bajas y altas velocidades]
Baja velocidad <ーー>alta velocidad
Suave/aire/plano/corte
40/120/320
Its softness makes it very effective for curved surfaces!
Abrasive discs for metal for 100mm disc grinders.
Mainly used for weld bead removal, deburring, rust removal and flat curved surface polishing.
[Feature 1 - Flexibility applied by unique softness]
The feature is that the backing of the cloth is very small and bends greatly, so the pressure can be adjusted to the object, and it is especially effective for curved surfaces.
Supplemental: When it touches the object to be polished, it makes a burr as shown in the image.
This causes the pressure to disperse, making it easy to adapt to the object, and it is highly effective on curved surfaces.
This "software" is the best choice for modeling free-form surfaces.
[Feature 2 - Smoothing]
This is because the protruding part is easily shaved off by the soft's characteristic "bent".
It is suitable for making it smooth.
*It is also the good point of "Soft" that it can be changed by the way of pressurization.
[Feature 3 - Compatibility with low-speed grinders]
It can be used with a standard grinder, but it also works well with a low speed grinder.
[Feature 4 - Grindstone Zirconia]
The grinding wheel of the polishing cloth is zirconia.
It is hard and suitable for heavy cutting, and is a strong material for cutting stainless steel.
[About the speed of the disc grinder]
When used at low speed (low rotation speed), the centrifugal force is reduced and the contact between the grinding disc and the workpiece becomes softer.
This makes the shape of the abrasive cloth more familiar to the workpiece, especially in the "soft" and "air" types where the fixing influence of the base is small, and makes it easier to perform abrasive cutting along the shape of curved surfaces.
In addition, the wear and tear, damage, biting and snagging caused by scattering of abrasive cloth can be reduced.
*It is also easy to operate evenly when finishing, leading to a reduction in scratches.
On the other hand, in heavy-duty cutting, the cutting speed becomes slower due to weaker contact and lower workload caused by reduced rotation speed.
For "Flat" and especially "Cut", recommending the use of a general high-speed rotation type.
[slow grinder]
*It is common to use a disc grinder with variable speed function, low speed and high torque type and speed controller.
[compatibility with low and high speeds]
Low speed <--------> High speed
Soft / Air / Flat / Cut
40 / 120 / 320