・60Φ
· Iluminación LED blanca
・ Indicador incluido (Haz alto, neutro, hidráulico, intermitente)
・ 220km / h
・ Exclusivo para vehículos con batería de 12V
・ AnalogODOMeter
・ AnalogTRIPMeter
・ Tiempo estimado de instalación: 1.0h
* Se requiere una suspensión del medidor antivibraciones para la instalación.
* El velocímetro es un modelo doméstico estándar.. "60km / h = 1,400rpm" Carro medidor mecánico genuino estándar (Vehículo que usa el cable del medidor) Así que básicamente puedes usarlo. No se puede utilizar para automóviles extranjeros con diferentes estándares de medición o algunos automóviles antiguos.
* Solo para vehículos con batería de 12V. Coche sin batería, coche con batería de 6V (Incluidos los modelos convertidos a equipos eléctricos de 12 V) No funciona correctamente
* No es completamente impermeable. La superficie del vidrio puede volverse turbia debido a la diferencia de temperatura y humedad dentro y fuera del medidor.
* Varios indicadores pueden quedar inutilizables al quitar el medidor genuino. Prepárese por separado si es necesario.
* El cable del medidor es un artículo consumible. Si el tubo exterior está agrietado o dañado, humedad, aceite, polvo, etc.. puede entrar en el interior del medidor y causar un mal funcionamiento. Al reemplazar el medidor mecánico, asegúrese de verificar el cable del medidor al mismo tiempo y reemplazarlo por uno nuevo si es necesario.
* El velocímetro y el tacómetro están en un estado de emisión de luz debido a la diferencia en la estructura interna y el color del dial. (Especialmente de noche) La diferencia saldrá. Tenga en cuenta.
* El cableado del arnés debe modificarse según el vehículo.. Por favor, prepare los terminales de bala, etc.. por separado.
* Las especificaciones del producto pueden cambiar debido a razones del fabricante. Tenga en cuenta.
・60Φ
・White LED lighting
・With indicators (high beam, neutral, oil pressure, turn signal)
・220km/h
・For 12V battery vehicles only
・Analog ODO Meter
・Analog TRIP Meter
・Approximate installation time: 1.0h
*An anti-vibration meter bracket is required for installation.
*The speedometer can be used basically with stock mechanical meters (vehicles that use a meter cable) of the "60km/h=1, 400rpm" standard that is commonly used with Japanese models.This product cannot be used for foreign vehicles with different meter standards and some old vehicles.
*Exclusive for 12V battery vehicles.This product does not work properly on battery-less vehicles and vehicles with 6V batteries (including models converted to 12V electrical).
*It is not completely waterproof.The glass surface may become cloudy due to temperature differences and humidity inside and outside the meter.
*Removing the stock gauges may result in the loss of use of various indicators.Please prepare separately if necessary.
*The meter cable is a consumable item.If the outer tube is cracked or damaged, moisture, oil, dust, etc. may enter the meter and cause a failure.When replacing a mechanical meter, be sure to check the meter cable at the same time and replace it with a new one if necessary.
*The speedometer and tachometer are different from each other due to the difference of the internal structure and the color of the dial, which causes the difference of the luminous state (especially at night).
*The wiring of the harness must be modified to suit the vehicle.Please prepare the crimp terminal etc. separately.
*There may be changes in product specifications due to the manufacturer's reasons.
When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.