con la unidad de luz
[Tamaño]
Anchura : Aproximadamente 760 mm
Longitud delantera / trasera : aproximadamente 500 mm
ALTURA : Aproximadamente 520 mm
[Material]
FRP
[Contenido del producto]
Cuerpo de la cubierta, juego de soportes, pantalla, juego de tornillos de pantalla
*Esta capucha es un producto de uso general hecho en el extranjero, por lo que puede haber rasguños, arañazos y roces, etc. que puede causar que los agujeros no encajen, y puede ser necesario modificarlo para su instalación. Por favor, asegúrese de entender lo siguiente antes de comprar.
*La unidad de luz y la capucha pueden interferir entre sí, en cuyo caso la parte que interfiere de la capucha debe ser removida.
*La horquilla y la capucha pueden interferir entre sí, por lo que hay que comprobar el rango de movimiento de los lados izquierdo y derecho y afeitar la capucha si hay interferencias.
*Otras partes que interfieren deben ser cortadas, afeitadas o procesadas de otra manera.
*La unidad de luz adjunta debe ser fabricada con un arnés de extensión del arnés principal.
*El agujero entre el estay y la capucha puede cambiar dependiendo de la posición de la capucha. En este caso, necesitas ensanchar el agujero de la capucha.
*Hay casos en los que los agujeros de la pantalla y la capota no coinciden, en este caso, hay que fijar la pantalla y los agujeros de la capota desde el agujero central de la capota hacia el exterior con una tuerca de pozo, y luego ensanchar las partes que no coinciden con una lima.
*Algunos lotes no tienen un agujero en el lado de la capucha para la pantalla. En ese caso, taladre los agujeros para que coincidan con la pantalla.
*Los métodos de procesamiento distintos a los listados aquí no están disponibles, así que por favor compruebe con el vehículo real.
*El producto está sujeto a procesamiento, por lo que no podemos aceptar devoluciones por la imposibilidad de instalarlo.
*Por favor, asegúrese de procesar e instalar el producto antes de pintar. No se aceptarán reclamaciones después de la pintura.
*Por favor, tenga en cuenta que las especificaciones del producto pueden cambiar debido a la razón del fabricante.
With light unit
[Size]
Width: Approx. 760mm
Front and rear length: Approx. 500mm
Height: Approx. 520mm
[Material]
FRP
[Components]
Cowl body, bracket set, windshield, windshield screw set
*Please make sure to read the notes before purchasing.
*7 inch projector LED headlight unit and the same type of light unit are used for the lights.
*Because this cowl is a universal product made non Japanese, it may have some scratches and scuffs, and the holes may not fit, so some modification is required for installation.Please make sure you understand the following information before purchasing.
*The light unit and cowl may interfere with each other, in which case it is necessary to shave the interfering part of the cowl.
*There is a case that the fork and the cowl interfere with each other, check the range of movement of both sides and if it interferes, it is necessary to shave the cowl.
*Other interfering parts need to be cut or shaved.
*The supplied light unit requires an extension harness to be fabricated from the main harness.
*Depending on the positioning of the cowl, the hole between the bracket and the cowl may be misaligned.To do this, you will need to widen the hole in the cowl.
*In some cases, the holes of the windshield and the cowl do not match, in that case, you need to fix the windshield with the well nut from the center hole of the cowl to the outside, and widen the holes with a file in order.
*Depending on the lot, some of them do not have the hole for the windshield on the cowl side.In this case, please drill the holes in order to match the windshield.
We will not provide information about processing methods other than those mentioned here, so please verify according to your actual bike.
*Any returns will not be accepted due to inability to install the product.
*Please be sure to process and install before painting.Any claims after painting are not accepted.
*There may be changes in product specifications due to the manufacturer's reasons.