[Material]Duralumina A2017
[Color]
Puente superior : Negro o marrón
Manillar : Negro
Tuerca : Aluminio duro anodizado
[Posición de la manija]
1 posición : CALLEJA Hola (STD) (*CAFE sólo está disponible para 1 posición)
[Manillar]
Longitud total: 280 mm
Diámetro interior: 16mm
[Ángulo de colgar]
CALLE:+5 grados.
RACING:-5 grados (CAFE no compatible)
[Ángulo de apertura / altura]Gratis
[Bloqueo del manillar]Disponible
[Función del tope del manillar]Disponible
[Freno / Embrague]
Compatible con la maestra de frenos OEM, soporte de embrague
(*Se requiere una manguera de freno para cambiar a un producto de posventa o para cambiar el cableado)
[Cable]
Compatible con OEM
(*El cable del acelerador, el cable del embrague y el cable de los interruptores deben cambiarse)
[Especificación]
Con soporte de contador exclusivo
Puede ser utilizado OEM soporte de la luz, el medidor, el cuerno, etc.
* Se puede mostrar otro color como la imagen del producto. Por favor refiérase a la información de coloración indicada arriba.
*Debido a que la altura y la anchura se modifican con respecto a la de serie, es necesario el cambio estructural para adaptarlo a la circulación por la vía pública. Si no solicitas la modificación estructural y cambias los datos de la matrícula de la moto, no podrás utilizarla en la vía pública.
*Este kit es de uso exclusivo para la Z900RS CAFE e incluye las piezas necesarias para su instalación. Para la Z900RS sin carenado, por favor compre otro número de pieza.
*Se requieren conocimientos y herramientas profesionales para la instalación, por lo que le rogamos que solicite la instalación a un taller profesional con mucha experiencia.
*La Z900RS CAFE tiene un número limitado de posiciones, por favor lea las siguientes notas antes de comprar.
*La Z900RS CAFE tiene una limitación de posición para evitar la interferencia con los intermitentes de serie. La posición compatible es Street Hi (STD) solamente.
*Dado que el propio cilindro maestro está cerca del indicador, el ángulo de instalación del cilindro maestro está limitado. Por favor, ajuste el ángulo para que no toque el indicador.
*Para evitar la interferencia con el capó, el capó, el medidor y la luz estarán desplazados hacia el frente.
*Al instalar el espejo retrovisor, es necesario retirar la abrazadera del espejo. Tenga en cuenta que el espejo no se puede sustituir si está fijado al manillar. Dependiendo del tipo de espejo, puede que no sea posible instalarlo debido a la interferencia con el capó.
*El espejo que se muestra en la imagen es del tipo ZII de corta estancia.
*Es necesario taladrar el manillar porque se trata de un interruptor fijo BOX.
* Tenga en cuenta que las especificaciones del producto pueden cambiar debido a razones del fabricante.
[Material] Duralumin A2017 material
[Color] Handlebar: Black
[Surface treatment] Stem nut: hard anodizing
[Handlebar position] 4 positions: Street Hi (stock) *CAFE only supports one position
[Handlebar Size]
・Total length: 280mm
・Inner diameter: 16mm
[Sweep angle]
・Street: +5 degrees
・Racing: -5 degrees
[Opening angle / Height] Free
[Handlebar locks] Available
[Handlebar stopper function] Available
[Specification]
・Compatible with stock brake master
・Compatible with stock clutch holder
・Confirmed Brembo RCS brakes
・Stock light bracket, meter, horn, etc. can be used
[Components]
・Special meter brackets
・Exclusive collar set
*Brake / Clutch*
・Depending on the position, the oil tank and clutch wire may interfere with the meter cover.
・The brake hose needs to be changed to an aftermarket one or the routing needs to be changed.
*Wires*
・The accelerator wire, clutch wire, and switch cables need to be changed.
*Position Details*
・When installing the fork clamps, the clamp bolts should face outward with the handlebar clamp attachment pointing upward.
・The handlebar clamps face +5 degrees in the straddled position.
・Other positions cannot be installed as they will interfere with the stock blinkers.
*The direction of the vehicle is determined by riding on the vehicle.
*This kit is specially designed for Z900RS CAFE with additional parts required for installation.For Z900RS without cowl, please purchase another part number.
*Z900RS CAFE has a limitation on the position to avoid interference with the stock blinkers.Please read the following notes before purchasing.
*Only Street Hi (stock) position is compatible.
・Since the master cylinder is close to the blinker, the installation angle of the master cylinder is limited.Adjust it so that it does not touch the blinker.(See image)
・In order to prevent interference with the cowl, the cowl, meter and light will be offset to the front.(See image)
・When installing the rearview mirror, it is required to remove the mirror clamps.Please note that the mirror cannot be replaced if it is fixed to the handlebar.Depending on the type of mirror, it may not be able to be installed due to interference with the cowl.
*The light bracket, meter, horn, etc. can be used with the stock products.
*Hole drilling to the handlebar is required to fix the switch box.
*Installation requires specialized knowledge and tools, so please contact a professional shop for installation.
*The mounting mirror in the image is ZII type short bracket.
*Images may contain other products.
*The image may contain other colors.
*There may be changes in product specifications due to the manufacturer's reasons.