diámetro del carrete : Φ14-18mm* diámetro recomendado 18mm
Altura de elevación : 270-345 mm (5 pasos)
Anchuras de brazo compatibles : Aprox. 260-400 mm (ajuste continuo)
capacidad de carga : 200kg
Abrazadera en forma de U incluida
*Debe adquirirse por separado una bobina de brazo oscilante con un diámetro de rebaje de ø 18.
*No se puede utilizar en bobinas con un diámetro cóncavo de Φ18 o superior.
*Las bobinas con un diámetro de rebaje inferior a Φ18 no proporcionarán una función de sujeción suficiente.
*El efecto muelle de las pinzas es difícil de recuperar debido al deterioro provocado por la edad. Se recomienda su sustitución.
*La altura de este producto debe ajustarse de modo que el neumático trasero quede ligeramente elevado. Si el soporte es demasiado alto, será difícil colgarlo e inestable.
*No se puede utilizar para los brazos oscilantes con diferentes pasos a ambos lados.
*Tenga en cuenta que las especificaciones del producto pueden estar sujetas a cambios debido a la conveniencia del fabricante. Por favor, entiéndelo.
Spool diameter: Φ14-18mm *Recommended diameter 18mm
Lift up high: 270-345mm (5 steps)
Supported swingarm widths: Approx. 260-400mm (full adjustable)
Load capacity: 200kg
U-shaped clamp attachment included
*It is necessary to separately purchase a swingarm spool with a concave diameter of Φ18.
*Cannot be used for spools with a concave diameter of Φ18 or larger.
*The clamping function will not be fully demonstrated for spools with a concave diameter of Φ18 or less.
*The spring effect of the clamps becomes less likely to return over time.In that case, we recommend replacement.
*The height of this product should be adjusted so that the rear tire floats a little.If it is too high, the stand will be unstable and difficult to hang.
*Cannot be used with swingarms that are different from each other on the left and right sides.
*There may be changes in product specifications due to the manufacturer's reasons.