Material/Material]Estancia : Acabado en acero negro
*Punto de instalación: Retire el perno de montaje del soporte tándem de serie en el lado izquierdo del cuerpo e inserte el producto entre los pernos. Si tiene alguna pregunta, le recomendamos que vaya a una tienda profesional o a un concesionario de coches.
*Por favor, no conduzca con su casco en este producto.
*Dependiendo del casco, la placa del talón puede ser rayada por la punta de la placa del talón. Se recomienda bloquear la placa del talón colocándola en la dirección en la que no se raye o protegiéndola con cinta adhesiva.
*Si quieres usar la cerradura del casco, el silenciador de la fábrica tiene que enfriarse antes de que lo uses.
*Si te preocupan los arañazos en el casco y el cuerpo, por favor considera usar la película de alta protección de Kijima (número de producto Kijima: 208-0851/208-0852) y otras cintas de protección.
*Si tiene dificultades para usar un casco, quiere usar un casco con cinturón corto, o quiere usar dos cascos en una cerradura en una emergencia, por favor considere usar el Llavero Kijima Assist para la fijación del casco.
Ayuda Kijima para cascos con una anilla en D del cinturón de fijación del casco de 20 mm o más.
Assist Kijima para cascos con una anilla en D del cinturón de fijación del casco de 19 mm o menos.
Copper Hellrock Assist, desarrollado en preparación para los tiempos y el nuevo modo de vida, también está disponible en cobre (copper).
*Si quieres instalar tu casco favorito en el asiento o en el casco del piloto tándem, por favor considera usar el cable de extensión de fijación de casco Kijima (430mm de largo).
El número de producto Kijima: P00040 (negro),P00041 (humo),P00042 (amarillo),P00043 (naranja),P00044 (rosa),P00045 (morado) y un total de seis colores disponibles.
*Tenga en cuenta que las especificaciones del producto pueden estar sujetas a cambios debido a la conveniencia del fabricante. Por favor, entiéndelo.
[Material] Bracket: Steel with black finish
*Installation position: This product is installed by removing the stock pillion bracket mounting bolt on the left side of the vehicle and inserting this product into the bracket.If you are not sure, it is recommended that you have it installed at a professional shop or vehicle dealer.
*Please refrain from riding with helmet hanging on this product in order to prevent helmet from falling off.
*Some helmets may be scratched by contact with the tip of heel plate.It is recommended that you lock it by placing it in a direction where it will not be scratched or by protecting it with tape.
*Please allow the stock exhaust to cool off before using the helmet lock.
*If you are concerned about scratches on your helmet or vehicle body when using this product, please use KIJIMA's High Protection Film (KIJIMA product no: Please consider the use of guard tapes such as 208-0851 / 208-0852).
*Please consider using KIJIMA Helmet Fixing Assist Key Chain if you have installed this product and want to hang a helmet, a helmet with short belt, or two helmets on one lock in an emergency.
・Assist for helmets with D-rings of 20mm or less for helmet fixing belts, Kijima item No.: There are 5 colors available: P00024 (Red), P00025 (Blue), P00026 (Orange), P00027 (Green), P00028 (Gunmetal).
・Assist for helmets with D-rings of 19mm or less for helmet fixing belts, Kijima item No.: There are 5 colors available: P00029 (Red), P00030(Blue), P00031 (Orange), P00032 (Green), P00033 (Gunmetal).
・Copper Hellrock Assist developed in preparation for the Coronavirus and the new way of life Item number: P00052 is also available in copper.
*If you want to put your favorite helmet on the seat or pillion rider's helmet after installing this product, please consider using KIJIMA helmet fixing extension wire (total length 430mm).
・Kijima Item No.: There are 6 colors available: P00040 (Black), P00041 (Smoke), P00042 (Yellow), P00043 (Orange), P00044 (Pink), P00045 (Purple).
*There may be changes in product specifications due to the manufacturer's reasons.