En las abrazaderas de manguera, el equilibrio de los componentes es importante, al igual que el par de apriete y la construcción..
Bandas de acero seminoxidable en paquetes de dos para diámetros exteriores de manguera, fabricadas con material de acero seminoxidable teniendo en cuenta principalmente la compatibilidad y el equilibrio de la manguera..
Características
ASSY
A diferencia de la soldadura y el calafateado convencionales, el mecanismo de bloqueo de un solo toque desarrollado de forma independiente garantiza que el aro y el tornillo se mantengan perfectamente en su sitio en la carcasa y funcionen a pleno rendimiento..
■ Resistencia.
Soldadura láser adicional en la costura trasera de la carcasa..
Esto aumenta la rigidez de la pinza en aproximadamente un 20% en comparación con las pinzas convencionales..
[Cifras de referencia ]
Par de rotura (valor medio) especificación ancho 13 mm: aprox. 10 N-m min.
Apriete (tornillo)
Las roscas de los tornillos y las ranuras de los aros están perfectamente engranadas en la carcasa sin aflojarse por vibraciones u otras causas, y presentan un fuerte par de apriete..
■ Apriete (aro)
La forma de la ranura en la superficie del aro difiere de la del tipo roscado en que el lado interior de la ranura engancha la manguera al apretarla, lo que permite un apriete más fuerte..
(Ranurado especial)
La manguera no se sale de las juntas con el paso del tiempo, incluso cuando se utiliza durante mucho tiempo..
Calidad
El aro es liso como un espejo tanto en el diámetro interior como en el exterior, y la R en el borde del aro elimina las rebabas y evita daños en la manguera incluso cuando se aprieta en exceso..
Tecnología
La punta del tornillo se aprieta en el extremo del innovador diseño de la carcasa para formar una unidad de tres partes, con las piezas individuales interconectadas de forma inteligente y funcional..
In hose clamps, the balance of the components is important as well as the tightening torque and construction.
We offer a pack of two semi-stainless steel bands that are compatible with the outside diameter of the hose, made of a semi-stainless steel material that is designed to be compatible and balanced with the hose first.
■Features
ASSY
Unlike conventional welding and caulking, the hoop and screw are held perfectly in the housing by a proprietary one-touch locking mechanism for maximum functionality.
■Resistance
Additional laser welding was applied to the housing back seam.
This improves the rigidity of the clamp by approximately 20% compared to the conventional product.
[Reference figures]
Breaking torque (average value) 13mm wide Spec: Approx. 10 N-m or higher
■Tightening (screw)
The screw threads and hoop grooves are ideally meshed in the housing without loosening due to vibration, etc., and boast strong tightening torque.
■Tightening (hoop)
The shape of the groove on the hoop surface differs from that of the threaded type in that the inner surface of the groove engages the hose when tightened, allowing for stronger tightening.
(Special groove processing)
Even if the hose is used for a long period of time, the hose will not stick out of the joints due to aging.
■Quality
The hoop is as smooth as a mirror surface on both the inside and outside diameters, and the radiused hoop edge eliminates burrs and prevents damage to the hose even when tightened too hard.
■Technology
The screw tip is tightened at the end of the revolutionarily designed housing to form a trinity that smartly and functionally ties the individual parts together.