■10 mm hacia abajo
Cantidad]2 piezas.
[Especificaciones]
Instalación Pitch : 330mm
Precarga de primavera : Ajuste de 5 pasos
El diámetro del agujero de montaje : Superior Φ10 / Inferior Φ10
*Cuando se instala este producto, las horquillas delanteras deben extenderse 7 mm al mismo tiempo para equilibrar el vehículo durante la conducción.
*El saliente máximo de las horquillas delanteras no debe superar los 7 mm. Si se sobrepasa el saliente máximo, las horquillas delanteras no pueden fijarse al puente superior y al vástago de dirección. Tenga en cuenta lo siguiente.
*Cuando se instala este producto, la distancia entre el silenciador y el suelo se hace más estrecha. Al pasar por curvas o baches, el silenciador puede entrar en contacto con el suelo.
*El caballete lateral de fábrica puede seguir utilizándose con este producto. Sin embargo, tenga en cuenta que el vehículo se inclinará de forma diferente en comparación con el caballete original.
*El cuadro contiene otros colores.
*Tenga en cuenta que las especificaciones del producto pueden estar sujetas a cambios debido a la conveniencia del fabricante. Por favor, entiéndelo.
*Dependiendo del lote, es posible que reciba el producto con el antiguo precio y la etiqueta con el antiguo código JAN antes del cambio de precio. Tenga en cuenta esto.
■10mm down
[Quantity] 2 pieces
[Specification]
・Mounting pitch: 330mm
・Spring preload: 5-way adjustment
・Mounting hole diameter: Upper Φ10 / Lower Φ10
*When this product is installed, the front forks must be extended up to 7mm in order to balance the bike body when driving.
*The maximum protrusion of the front fork is 7mm or less.If more than the maximum protrusion is performed, the front forks cannot be secured to the top bridge and steering stem.
*When this product is installed, the distance between the exhaust and the ground will be closer.The exhaust may come in contact with the ground when passing through curves, bumps.
*The stock side stand can be used without modification even when this product is installed.However, please note that this will change the tilt of the bike compared to stock.
*The image contains other colors.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.