22,703.64 ARS
(4,000 JPY)
18,616.98 ARS
(3,280 JPY)
(18% OFF)
4 (36 opiniones)
Very Good
It was goodI bought it for front wheel maintenance as it comes with a Center Stand. 。
I didn't expect much, but it went around the front wheel more than I expected.
I am happy with the price.
Reviews For DAYTONA Soporte de rodillo para mantenimiento From Other Webike User
Excellent
DaytonaVề chất lượng và kết cấu rất phù hợpVề trải nghiệm sử dụng tốtVề kiểu dáng thiết kế đẹpVề bảng đo size vừaGiá thành và so với các sản phẩm khác ko đắt lắmVề vận chuyển và đóng gói kĩMọi lời khuyên hoặc lưu ý khi mua hàngView Detail
Excellent
Enough for chain cleaning/adjustment and rear wheel washing.This type of roller stand has been around for a long time, but the weight is a little heavy and the rubber cushion on the back of the stand is
They were all peeled off with a single blow.
The body of the DAYTONA model is light and the position of the rollers can be easily changed according to the engine displacement volume of the motorcycle.
You can use from Mini bike to Liter machine.
I used to have a J-TRIP Stand for Beginner, but it took up a lot of space when not in use.
It gets progressively more difficult to clean up.
It's easy to store and it doesn't take up much space if you lay it down after use.
For example, when you put the rear wheel on the roller stand, you should put it slightly left of the center.
Let's aim at it and put it on at once.
After installing the front brake lever, tie the front brake lever with rubber or anything else to lock it.
When you turn the rear tire, the tire will shift to the right, so it is better to put the tire on the left.
I think it's easy to work with.View Detail
Excellent
Easier to use than I thought.I bought this for ChainMaintenance on my VTR250.
Maybe it's because the car is on the lighter side, but I didn't have to put that much effort into turning the Tire to get it to turn.
Body is the weight that can be held with one hand, and it is the impression that it is possible to put in and out easily because the place where it puts it is not troubled that much.
When you adjust the width of the Roller and Roller, you can remove it by pushing in the protruding part of the Roller, but I was able to remove it easily without putting any effort.
I worked with it on a flat Concrete and it didn't shift position.
To be honest, I didn't expect so much before using it, but it was more convenient and easy to handle than I expected. But if you have a large or heavy motorcycle, it may not be as stable as you expect.View Detail
Average
It takes more strength than you think to turn it.I bought a similar Roller stand at a certain cheap tool store and it did not turn by hand at all.
I trusted Brand and bought this one.
It's a 900cc motorcycle, but it takes more power to turn the tire than I expected. It is much better than the thing of the cheap tool store, but ChainMaintenance is quite Large strange. It seems to be inevitable with this type.
If you have a place to store it, it's much better to buy a Maintenance Stand. It's for people who don't have storage space.View Detail
Most Viewed Reviews Of DAYTONA Other Maintenance Stands
Excellent
DaytonaVề chất lượng và kết cấu rất phù hợpVề trải nghiệm sử dụng tốtVề kiểu dáng thiết kế đẹpVề bảng đo size vừaGiá thành và so với các sản phẩm khác ko đắt lắmVề vận chuyển và đóng gói kĩMọi lời khuyên hoặc lưu ý khi mua hàngView Detail
Excellent
Enough for chain cleaning/adjustment and rear wheel washing.This type of roller stand has been around for a long time, but the weight is a little heavy and the rubber cushion on the back of the stand is
They were all peeled off with a single blow.
The body of the DAYTONA model is light and the position of the rollers can be easily changed according to the engine displacement volume of the motorcycle.
You can use from Mini bike to Liter machine.
I used to have a J-TRIP Stand for Beginner, but it took up a lot of space when not in use.
It gets progressively more difficult to clean up.
It's easy to store and it doesn't take up much space if you lay it down after use.
For example, when you put the rear wheel on the roller stand, you should put it slightly left of the center.
Let's aim at it and put it on at once.
After installing the front brake lever, tie the front brake lever with rubber or anything else to lock it.
When you turn the rear tire, the tire will shift to the right, so it is better to put the tire on the left.
I think it's easy to work with.View Detail
Excellent
Easier to use than I thought.I bought this for ChainMaintenance on my VTR250.
Maybe it's because the car is on the lighter side, but I didn't have to put that much effort into turning the Tire to get it to turn.
Body is the weight that can be held with one hand, and it is the impression that it is possible to put in and out easily because the place where it puts it is not troubled that much.
When you adjust the width of the Roller and Roller, you can remove it by pushing in the protruding part of the Roller, but I was able to remove it easily without putting any effort.
I worked with it on a flat Concrete and it didn't shift position.
To be honest, I didn't expect so much before using it, but it was more convenient and easy to handle than I expected. But if you have a large or heavy motorcycle, it may not be as stable as you expect.View Detail
Average
It takes more strength than you think to turn it.I bought a similar Roller stand at a certain cheap tool store and it did not turn by hand at all.
I trusted Brand and bought this one.
It's a 900cc motorcycle, but it takes more power to turn the tire than I expected. It is much better than the thing of the cheap tool store, but ChainMaintenance is quite Large strange. It seems to be inevitable with this type.
If you have a place to store it, it's much better to buy a Maintenance Stand. It's for people who don't have storage space.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING