I really like it.The design, completeness, and bracket fitting of the object were perfect for my standards.The accompanying manual was in Japanese, but the pictures alone were enough to explain.
View Detail
331,060.43 ~ ARS (38,638 JPY)
Webike Point: +386~ pt
(3,307.34 ARS)
información de entrega
-
Please select product form first.
Descripción del producto a continuación se traduce automáticamente por Google.
Product detail
Productos sin pintar
Sección de conductos : Malla de aluminio prefabricada
[Accesorios]
Estancia FRP (gel negro) X4
Arandela M6 X1
Tornillos para cerchas M6x15mm X4
Ojales X2
**No se puede utilizar con silenciadores normales. Sólo se ha comprobado el montaje del escape completo Akrapovic (modelo con catalizador).
*Si es necesario, adquiera una lámina resistente al calor (25x50) y fíjela. Se recomienda aplicarlo en el lado izquierdo del bajo capó y en el silenciador trasero.
*La estructura de recogida de aceite (con dos ojales en la parte delantera y trasera) está diseñada para recoger el aceite, pero debido a la posición baja de la abertura del conducto, es aconsejable comprobar el reglamento de la carrera antes de su uso.
*Los ojales deben retirarse cuando se circula por la vía pública.
*Este producto está hecho de resina resistente al calor.
*Los productos de FRP y de carbono son productos sin pintar.
*El FRP (gel negro) se ha pulido hasta conseguir un acabado brillante y puede utilizarse tal cual, pero es un producto que requiere pintura.
*La superficie del carbono también se pule con un acabado de gelcoat transparente para darle un acabado brillante. Este producto se puede utilizar tal cual, pero si es necesario se debe recubrir con uretano transparente.
*El producto sólo debe ser instalado por un mecánico o un taller con conocimientos competentes (de acuerdo con el manual de servicio emitido por el fabricante de la moto) y habilidades. No podemos garantizar la calidad del producto en caso de instalación y uso incorrectos.
*La imagen es un tejido de sarga de carbono.
*Tenga en cuenta que las especificaciones del producto pueden estar sujetas a cambios debido a la conveniencia del fabricante. Por favor, entiéndelo..
* Este artículo no se puede cancelar, ni volvió intercambio después de realizar un pedido.
Precaución
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Opiniones de los usuarios
Reviews with image
Fits:YAMAHA MT-09 21-, YAMAHA MT-09 SP 21-
Installed on: YAMAHA XSR900
Fits:YAMAHA MT-09 21-, YAMAHA MT-09 SP 21-
Jun 30, 2022
Installation on SP Tadao Exhaust System (not compatible, modification required)
I was looking for an Under Cowl that could catch oil, and I found this product and ordered it.
The installation was confirmed as AKRAPOVIC Exhaust System, but we have replaced it with SP Tadao Exhaust System (POWERBOX FULL RS), and the expansion chamber part is cylindrical, so we purchased it on the premise of modification.
After confirming that the rear end would hit as expected when actually installed, the necessary area was shaved off a little at a time to match the actual product.
The object is cylindrical in shape and the under cowl is also inclined, so it did not go as expected. After repeatedly removing and shaving, shaving and matching, we finally secured clearance with the expansion chamber, and when we tried to install it, the screw position did not match slightly.
After forcibly installing it and rechecking the clearance, I found that the expansion chamber at the rear end was not hit and the parts at the mounting point were loose enough to allow for some adjustment without tightening the bolts, but when I looked underneath, I found a moccoli that looked like the forward part of the expansion chamber.
I thought about cutting up this area as well, but it would be a complete disaster if the oil receiving function is lost, so I decided to put Heat Insulating Material on it for now and see how it goes.
I completed the installation and test drove it to lightly fill it with Gasoline, but it smelled a little burnt? I thought I would give up and drill a hole in the oil receiver if it burns, since I usually remove the oil receiver rubber plug.
This time, it was installed outside of the conformity. I wished the bottom was 5 to 10mm lower and the back end sloped back a little more, but I am satisfied because it is almost exactly as in the Image.
Helpful?
New Custom Articles
